home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / The World of Computer Software.iso / pwplus15.zip / PWBG.DOC < prev    next >
Text File  |  1992-12-27  |  11KB  |  303 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.                            PW BOOT GUARD 2.01
  19.  
  20.                    Copyright (C) 1992 Lonnie L. Logue
  21.  
  22.  
  23.                    -- THE FLOPPY BOOT PREVENTATIVE --
  24.  
  25.  
  26.  
  27.                                 FEATURES
  28.  
  29.  
  30.         1.  Disables access to the hard drive if the computer was booted
  31.             from a floppy diskette, thereby preventing the bypass of
  32.             config.sys or autoexec.bat password programs.
  33.  
  34.  
  35.  
  36.                               INSTALLATION
  37.  
  38.  
  39.             Syntax: PWBG [switch]
  40.  
  41.             Switch: /i = install
  42.                     /r = remove
  43.  
  44.  
  45.  
  46.                             *** WARNING ***
  47.  
  48.  
  49.         Please run this program only on a bootable floppy disk to
  50.         guarantee complete recovery on non-compatible systems.
  51.  
  52.         After installation, write protect and store the floppy in a safe
  53.         place.  It contains the file PWBG.DAT which is NEEDED to remove
  54.         PWBG 2.01.  Make backup copies of this file and store in a safe
  55.         place.  You can even ZIP them up if you like.
  56.  
  57.  
  58.  
  59.                               COMPATIBLES
  60.  
  61.  
  62.         PW Boot Guard 2.01 has been tested on IBM Compatibles under the
  63.         following conditions:
  64.  
  65.         OPERATING SYSTEMS:  a. MS-DOS 3.3
  66.                             b. MS-DOS 4.01
  67.                             c. MS-DOS 5.0
  68.                             d. DR DOS 6.0
  69.  
  70.  
  71.         NOTE: This product is not compatible with Microsoft Windows
  72.               running in 32 bit disk access mode.
  73.  
  74.  
  75.  
  76.                              ERROR MESSAGES
  77.  
  78.  
  79.         1.  REQUIRES DOS VERSION 2.0 OR ABOVE
  80.  
  81.                 DOS version 2.0 or above is required for the operation
  82.                 of this program.
  83.  
  84.  
  85.         2.  PROGRAM MUST BE USED FROM DRIVE A:
  86.  
  87.                 In order to guarantee complete recovery from
  88.                 installations on non-compatible systems, it is necessary
  89.                 for this program to run from a bootable floppy disk in
  90.                 drive A.
  91.  
  92.  
  93.         3.  PW BOOT GUARD ALREADY INSTALLED
  94.  
  95.                 PW Boot Guard is already installed.  Use the /r switch
  96.                 to remove.
  97.  
  98.  
  99.         4.  PW BOOT GUARD NOT INSTALLED
  100.  
  101.                 PW Boot Guard is not installed.  Use the /i switch
  102.                 to install.
  103.  
  104.           NOTE: You may receive this message if PWBG is receiving
  105.                 interference from a software disk cache.  Make sure you
  106.                 boot from a system floppy before attempting removal.
  107.  
  108.                 If PWBG 2.01 has been relocated or damaged by a boot
  109.                 sector virus you may also receive this message.  If you
  110.                 believe this to be the case, boot from the write
  111.                 protected system diskette on which you stored PWBG.DAT
  112.                 and use the hidden /e emergency removal switch by
  113.                 typing: PWBG /e  This will restore your Master Boot
  114.                 Record and Partition Table using the data contained in
  115.                 the PWBG.DAT file.
  116.  
  117.  
  118.         5.  UNABLE TO LOCATE PWBG.DAT
  119.  
  120.                 PW Boot Guard is unable to locate the file PWBG.DAT.
  121.                 Be sure this file, and the program file PWBG.EXE are
  122.                 located on a bootable floppy diskette in drive A: before
  123.                 trying to remove PW Boot Guard.
  124.  
  125.  
  126.         6.  PWBG.DAT SERIAL NUMBER MISMATCH
  127.  
  128.                 The file PWBG.DAT has a different serial number than
  129.                 that assigned during the most recent installation of
  130.                 PWBG 2.01.  It may be that you keep several PWBG.DAT
  131.                 files stored in various places and they just got mixed
  132.                 up.
  133.  
  134.                 The unique serial number safeguards against restoring
  135.                 the PWBG.DAT file of another computer, whose Master Boot
  136.                 Record and Partition Table may be entirely different
  137.                 than yours, onto your computer which may result in the
  138.                 inability to access the hard drive or the loss of data.
  139.                 This may be corrected by restoring immediately with the
  140.                 correct PWBG.DAT file.
  141.  
  142.           NOTE: There is also the chance that the PWBG 2.01 Master Boot
  143.                 Record has been damaged by a virus or other program and
  144.                 no longer contains a correct serial number.  If you
  145.                 believe this to be the case, you may use the hidden /e
  146.                 switch to force emergency removal after first booting
  147.                 from the write protected system diskette on which you
  148.                 stored the PWBG.DAT file.  If you have a boot sector
  149.                 virus, booting from a floppy will make sure that the
  150.                 virus is unable to setup any protection that might
  151.                 prevent it's removal.  It will also disable PWBG 2.01's
  152.                 own write protection mechanism which may also prevent
  153.                 PWBG 2.01 from overwriting the virus.
  154.  
  155.  
  156.         7.  PWBG.DAT IS CORRUPT
  157.  
  158.                 The CRC integrity check on PWBG.DAT has failed.  This
  159.                 file has been corrupted and is unsuitable for use in the
  160.                 removal process.  Use another copy of PWBG.DAT.
  161.  
  162.                 PWBG.DAT is NEEDED for removal of PWBG 2.01, therefore
  163.                 make backup copies of PWBG.DAT and store in a safe
  164.                 place.  You can even ZIP them up if you like.
  165.  
  166.           NOTE: You will also get this message by trying to use versions
  167.                 of PWBG.DAT files prior to 2.0 as they used a different
  168.                 form of error checking.  To view the version of the
  169.                 PWBG.DAT file, at the DOS prompt type: TYPE PWBG.DAT and
  170.                 press Enter.  (versions 2.0 - 2.01 display PWBG 2.0)
  171.  
  172.  
  173.         8.  FIXED DISK NOT PRESENT OR INVALID
  174.  
  175.                 There is no fixed disk on this system, or it is
  176.                 invalid.
  177.  
  178.  
  179.         9.  INVALID PARTITION TABLE
  180.  
  181.                 PWBG 2.01 will only install onto systems that have a
  182.                 standard 512 byte Master Boot Record which contains a
  183.                 valid, bootable Partition Table.
  184.  
  185.                 If you receive this error message, check to make sure
  186.                 that you don't have a program similar to PWBG 2.01
  187.                 already installed.  Also, boot from a write protected
  188.                 system diskette and scan the C: drive for boot sector
  189.                 viruses using a good virus scanner (i.e. Norton's Anti
  190.                 Virus, SCAN, FPROT etc.) as a virus may have altered the
  191.                 Partition Table, or may have overwritten or relocated
  192.                 PWBG 2.01 if you already had it installed.
  193.  
  194.  
  195.         10.  READ SECTOR FAIL
  196.  
  197.                 PWBG 2.01 encountered a disk sector error while
  198.                 attempting to read the Master Boot Record.  This may be
  199.                 a sign of hard drive trouble.  Boot from a system
  200.                 diskette and try again.  If you have no trouble this
  201.                 time, it may be that a virus or other program is
  202.                 intercepting the sector reads.
  203.  
  204.  
  205.         11.  WRITE SECTOR FAIL
  206.  
  207.                 PWBG 2.01 encountered a disk sector error while
  208.                 attempting to write the Master Boot Record.  This may be
  209.                 a sign of hard drive trouble.  It may also mean that a
  210.                 program (ie. PWMBR or maybe even a virus) has write
  211.                 protected your Master Boot Record.
  212.  
  213.                 If you have the program PWMBR installed, you must first
  214.                 remove it before installing PWBG 2.01.  If you don't
  215.                 have PWMBR installed, boot from a write protected system
  216.                 diskette and scan your hard drive for a boot sector
  217.                 virus.
  218.  
  219.           NOTE: PWMBR is another program I've written.  It is a small
  220.                 and efficient MBR password program which disables floppy
  221.                 diskette boots entirely.
  222.  
  223.  
  224.  
  225.                                 UPDATES
  226.  
  227.  
  228.           1.0 ......... Initial release of this program.
  229.                         Dated 6-4-92 1:00:00am
  230.  
  231.           1.1 ......... Bugfix - Found to be non-compatible with SCSI
  232.                         hard drives.  Version 1.0 saved a hidden control
  233.                         file to the root directory of drive C.  The
  234.                         program needed to access this file to remove
  235.                         itself.  When the SCSI hard drive would not boot
  236.                         it became impossible for the user to access the
  237.                         hard drive without reformating or contacting me.
  238.                         Version 1.1 solves this problem nicely by
  239.                         restricting it's operation to drive A.  It saves
  240.                         a non-hidden encrypted control file.  This file
  241.                         is needed for removal, please make backups and
  242.                         store in a safe place.
  243.                         Dated 6-21-92 1:10:00am
  244.  
  245.           1.2 ......... Bugfix - If the disk in drive A were full
  246.                         (unlikely, but possible), the program would
  247.                         continue installation even though the control
  248.                         file was not properly saved.  This version
  249.                         corrects the problem.  Tightened code, modified
  250.                         control file signature to prevent the reading of
  251.                         previous versions control files.
  252.                         Dated 7-4-92 1:20:00am
  253.  
  254.           2.0 ......... Now compatible with SCSI drives as Partition
  255.                         Table is no longer scrambled.  Norton's Disk
  256.                         Doctor will no longer recognize a defect in the
  257.                         Partition Table.  Added a /e trapdoor switch so
  258.                         that PWBG 2.0 will use any valid version 2.0 or
  259.                         higher PWBG.DAT file to restore the Master Boot
  260.                         Record and Partition Table even if the PWBG.DAT
  261.                         serial number doesn't match as might be the case
  262.                         if the Master Boot Record has been damaged by a
  263.                         virus or other program.
  264.                         Dated 12-12-92 2:00:00am
  265.  
  266.           2.01 ........ Bugfix - corrected a problem PWBG20 had with
  267.                         extended partitions.
  268.                         Dated 12-27-92 2:01:00am
  269.  
  270.  
  271.  
  272.                             SOFTWARE LICENSE
  273.  
  274.  
  275.                    Copyright (C) 1992 Lonnie L. Logue
  276.  
  277.  
  278.         This product is SHAREWARE!  You may use PWBG.EXE without charge
  279.         for an evaluation period not to exceed 30 days.  Continued use
  280.         after the evaluation period requires registration.  Use of this
  281.         software, registered or not, is NOT permitted unless the following
  282.         conditions are agreed to:
  283.  
  284.             1.  No fee is charged for use, copying or distribution.
  285.  
  286.             2.  It is not modified in any way.
  287.  
  288.         If you find this program useful, a $5 registration would be
  289.         appreciated.  Please send CASH, check or money order to:
  290.  
  291.                             Lonnie L. Logue
  292.                             9231 Goldenrod Lane
  293.                             Upper Marlboro, MD  20772
  294.  
  295.  
  296.  
  297.  
  298.  
  299.  
  300.  
  301.                                  -EOF-
  302.  
  303.